Aluminum 4 1/2" NH to 4" NPT Double Female Threads_NPSH The hose mender allows for

The hose mender allows for a user to cut off the bad section of the hose and clamp the hose back together

Minimal man power is required to deploy the hose

You should end with the nozzle end on top and a female coupling on the bottom

Our anodized aluminum 5 inch NH / NST rigid male mounting plate is the perfect match for organizing any adapter or nozzle

Please call or check with your local fire department if you have any questions

Aluminum 4 1/2" NH to 4" NPT Double Female Threads_NPSH The hose mender allows forAluminum adapters are fabricated from seamless extruded 6061 T6 aluminum and hard coat anodized per MIL A 8625 Type III, Class 1. Threads have a blunt start Higbee cut with indicators on adjacent lugs. Part identifications are permanent and stamped prior to hardcoat. Adapters and components meet the requirements of NFPA 1963. A double swivel adapter will not swivel or rotate once both ends are tightened to the male connections. The Safe Water Drinking