Simpson Strong-Tie THAI5.13/21 Adjustable I-Joist Truss Hanger - G90 Galvanized Deck Screws Routing (if needed): Recess areas

Routing (if needed): Recess areas for the hanger plates per project specifications

then drive pin until flush with top of head

Fill all connector nail holes as specified by the connector's installation instructions to achieve rated load values

Electrical conduit and wiring runs

The Simpson ECCO7 End Column Cap Legs Omitted

Simpson Strong-Tie THAI5.13/21 Adjustable I-Joist Truss Hanger - G90 Galvanized Deck Screws Routing (if needed): Recess areasThe Simson THAI Adjustable Hanger is designed for I joists and features extra long straps that can be field formed for height adjustment and top flange hanger convenience. Positive angle nailing prevents the bottom flange of the I joist from separating. There is no longer room for increasing the uplift loads for earthquake or wind loading. Where other loads are govern, reduce. Use all specified fasteners. Verify that the header can take the fasteners