Antifoam H (Litre) Use AT 1:10000 (.01% Of Mix) Product Type_Roll Pin 16mm Diameter Rotaloc Plus Annular

16mm Diameter Rotaloc Plus Annular Cutter

H6 / C Adjustable Hand Reamer 15

+/-10min for 45 degree square

Thread M10 x 1

Showa Ext-C-300mm Showa Extension

Antifoam H (Litre) Use AT 1:10000 (.01% Of Mix) Product Type_Roll Pin 16mm Diameter Rotaloc Plus AnnularANTIFOAM NS is an aliphatic non silicone defoamer, which can be used to temporarily control excessive foam. Add ANTIFOAM NS to CIMCOOL metalworking fluid mixes as recommended by CIMCOOL Technical Services. Use in the mix when foam is a problem. A typical use would be to temporarily control foam in a new charge (fresh mix). Typically as metalworking fluid mixes age they become less foamy. Follow the recommended dilution range (see below). Shake or stir