Simpson DGHF1.81/16 Fire Wall Hanger - G90 Galvanized, Made to Order Non-Returnable FRFP/URFP Retrofit Foundation Plates The versatile GW consists of

The versatile GW consists of a 1/2" dome washer and a pin of 1/2"

They break off when the steel is engaged

The versatile GTS consists of a 1/2" x 1/4-20-threaded stud and a 3/4" x 0

the THGQ and THGQH hangers for multi-ply girder trusses use Simpson Strong-Tie Strong-Drive SDS Heavy-Duty Connector screws to provide high load capacities and easier installation compared to bolts

Position the FPBS44 E-Z Spike at the desired post location and drive the spike vertically into the ground using a sledgehammer or approved driving tool

Simpson DGHF1.81/16 Fire Wall Hanger - G90 Galvanized, Made to Order Non-Returnable FRFP/URFP Retrofit Foundation Plates The versatile GW consists ofThe Simpson Strong Tie DGBF fire wall hangers are a great time saving solution for multi level building construction. These hangers are easily installed on either 2x4 or 2x6 two hour wood stud fire walls while framing. These hangers have been tested according to ASTM E814 and received F (flame) and T (temperature) ratings for use on one or both sides of the wall. These ratings verify that the hangers do not reduce the two hour fire wall assembly