Watts LFM116 GRV E 20-200 TC 3 - Part of the LFM116 Series HDPE 16″ × 16″ cast-iron body

16″ × 16″ cast-iron body with 7″ deep sump

Specifications Body Material Cast Iron Body Pattern Straight Bonnet Type Flanged Brand Watts Class Rating Does Not Apply To Product Control Type Cross Handwheel Disc Material Cast Iron EAN 098268089134 Epoxy Coating Type None Inlet Connection Size 2 1/2 IN Inlet Connection Size-Metric 65 MM Inlet Connection Type Flanged Joint Inlet Thread Type Does Not Apply To Product Lead Free YES Maximum Pressure-PSI 250 Maximum Temperature-Fahrenheit 140 Outlet Connection Size 2 1/2 IN Outlet Connection Type Flanged Joint Outlet Thread Type Does Not Apply To Product Part Number 0702310 Series 408-OSY-RW Stem Shaft Material Bronze Stem Type Rising Valve Style OSY WOG Rating 250 PSI Specification Sheet - 408-OSY-RW

while the interlocking design and rebar clips allow precise alignment and secure installation in concrete pours

Specifications Actuation No Assembled Dry Yes Balance Stop Plate No Ball Material Chrome Plated Brass Body Finish Brass Body Material Brass Brand Watts Buy American Act Compliant NO Class Rating Does Not Apply To Product Control Type Lever Handle CV Rating Does Not Apply To Product EAN 098268141177 Electrical Rating Does Not Apply To Product Inlet Connection Size 1 IN Inlet Connection Size-Metric Does Not Apply To Product Inlet Connection Type Press Inlet Thread Type Does Not Apply To Product Lead Free Not In Scope Maximum Temperature-Fahrenheit 406 Minimum Temperature - Celsius 38

or Spee-D Channel Drains

Watts LFM116 GRV E 20-200 TC 3 - Part of the LFM116 Series HDPE 16″ × 16″ cast-iron bodyThis 3 inch ACV is armed with ArmorTek, a patented 3 part advanced epoxy coating system designed to limit both microbial induced (MIC) and exposed metal substrate corrosion. This pressure relief control valve is designed to permit flow when upstream pressure is above the adjustable setpoint of the control pilot, and throttle toward closed when upstream pressure falls below the adjustable setpoint. When the valve is installed off the main line on the